Expert Answers about Jeep JL Wrangler

• Can the Rhino-Rack Nautic Stack Fit on an Adarac Ladder Rack
• Yes. The Rhino-Rack Nautic Stack Kayak Carrier part # RRS520 will work with an Adarac Truck Bed Ladder Rack like the Pro Series Custom; you will need to use the integrated channels in the crossbars with the t-bolts that come with the carrier.
  view full answer...


• Will The Air Lift 1000 AL60829 Work On A 2018 Jeep Wrangler JL With A 2.5" Lift?
• Yes, the Air Lift 1000 Air Helper Springs # AL60829 will work on your 2018 Jeep JL Wrangler with a 2.5" lift. The kit will come with a few smaller spacers. Depending on what kind of lift kit you have, an additional 2" spacer may be needed. For that you can use part # AL52420.
  view full answer...


• Recommended Curt Trailer Hitch for 2018 Jeep JL Wrangler Sport
• You can install the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118786 on your 2018 Jeep JL Wrangler Sport so long as the flat tow wiring kit you used does not connect behind the tail lights, which you will need in order to install Harness # 118786. The diodes themselves will not be an issue as they are essentially just a gateway. A trailer hitch is also compatible with a flat tow set up and since you mentioned a Curt hitch I strongly recommend the Curt Trailer Hitch...
  view full answer...


• Recommended Flat Towing Equipment For A 2018 Jeep Wrangler JL
• The Roadmaster Nighthawk All Terrain, Non-Binding Tow Bar w/ LED Lights # RM-676 is a great choice for flat towing your 2018 Jeep JL Wrangler. It has a non-binding design which makes disconnecting a breeze on any terrain and a large hookup radius to make connecting to your base plates easy on any terrain as well. It has LED lights to help you hook up or disconnect in the dark and comes with a 6-way to 7-way cable and safety cables so you won't have to purchase them separately. To flat...
  view full answer...


• Does Computer Have to be Flashed on 2018 Jeep Wrangler w/ Tow Package to Use Curt Echo
• The computer will not have to be flashed on your 2018 Jeep Wrangler in order to use the Curt Echo Wireless Trailer Brake Controller # C51180. Since your Jeep already has the 7-way and is ready to go, you'll just need to plug in the Echo, set it up with the app and you're set! I have added a link below to a video review for you to check out as well if you'd like to take a look.
  view full answer...


• Can The Roadmaster Invisibrake Be Installed In The Rear Compartment Of A 2018 Jeep JL Wrangler
• I spoke with Brad, one of our installers here that's done quite a few Invisbrake installs, and he stated that box under the front driver seat is tucked in further than you'd think so you'd have to purposefully kick it and it wouldn't be an accident. That being said, it is possible to mount the compressor box in the back of your Wrangler but you'll most likely need to get some additional 1/4" nylon vacuum line to go from the box to the brake booster in the engine compartment and also some...
  view full answer...


• Recommended 3-Bike Rack For A 2018 Jeep JLU With Spare Tire
• The RockyMounts WestSlope 3 Bike Rack - 2" Hitches # RKY10223 you linked to has a distance of 10-1/2" between the closest part of the rack and the center of the hitch pin to give you enough room for your spare tire. Its versatile design fits most bikes regardless of frame design, suspension, or brake style and tiered mounting positions optimize bike spacing. It has a weight capacity of 40lbs per bike. Ratcheting hooks hold your bikes securely by the front wheels and ratcheting wheel straps...
  view full answer...


• Fit of Swagman S64650 XC Bike Rack on 2018 Jeep Wrangler JL
• In order to determine if the Swagman # S64650 XC bike rack will work on your 2018 Jeep Wrangler, you'll need to measure the horizontal distance rearward from the hitch pin hole to the furthest rearward point of the rear mounted spare tire. If this distance is less than 10 inches, the rack will work well for you. I'll link you to a help article that describes exactly how to take this measurement. An optional locking hitch pin/cable lock is available as part # S64031. I've linked to demonstration...
  view full answer...


• Westin ProTraxx Stainless Step Bars for 2018 Jeep Wrangler JL
• Sure do! You'll want the Westin ProTraxx Stainless nerf bars, part # 21-24050. The bars themselves are stainless, the hardware is zinc plated for corrosion resistance and the brackets are powder coated steel. The brackets and the hardware are covered under the warranty.
  view full answer...


• Can I Use the Exposed Racks ER74FR If I Have a Hard Top
• Yes. You could use the Roof Rack for Jeep JL Soft Top - Square Bars - Steel - Black # ER74FR with the hardtop off; it's actually designed to be used with the top off so it sounds like it's the perfect solution for your 2018 Wrangler JL. You will need to remove the bars to put the hardtop back on, but if you ever decide to get a soft top then you can put it on over these bars. It's really a pretty cool solution! This rack will connect to the windshield housing and the speaker roll bar area.
  view full answer...


• RoadMaster BrakeMaster Custom Seat Adapter for a 2018 Jeep JL Wrangler
• Yes, the correct RoadMaster BrakeMaster Custom Seat Adapter for the Roadmaster BrakeMaster Braking System part # RM-9100 on your 2018 Jeep JL Wrangler is part # RM69FR.
  view full answer...


• Roof Top Tent Compatibility with Thule Aero Roof Rack on 2018 Jeep Wrangler JL
• For a 2018 Jeep Wrangler JL hardtop, the Thule Rapid Gutter Feet for AeroBlade Crossbars - 5" High - Qty 4 # TH300R along with the Thule WingBar Evo Crossbar # TH711500 in silver or # TH711520 in black will fit. I also recommend the lock cylinder kit # TH450400 to secure the rack. This rack will have a capacity of 165 lbs so it will work well with a tent like the Yakima SkyRise HD # Y07437. These tents are designed so that they will work on a roof rack with a capacity of 165 lbs because...
  view full answer...


• Tire Pressure Sensors Compatible with the TST Tire Pressure Monitoring System
• The Brass Tire Sensors for TST TPMS - Qty 2 # TST-507-RV-S2 and the Signal Booster for TST TPMS # TST-507-R will work well with your current monitor. Many people have done this and the monitor works well with the caps as well as the flow through sensors in whatever combination you desire.
  view full answer...


• Does the Roadmaster Brite-Lite Converter RM-732 Work with a 2018 Jeep Wrangler with LED Tail Lights
• The Brite-Lite converter # RM-732 can be used with your 2018 Jeep Wrangler and kit # RM-154. But I want to clarify what this converter does. It takes separate brake light and turn signal circuits and combines them. Those circuits are already combined on a 2018 Jeep Wrangler and if the RM-154 is plugged into a trailer connector on the RV side then those circuits are also already combined. If the RV does not have a trailer connector but has turn signals and brake lights that use separate...
  view full answer...


• How To Lock the Thule Rapid Gutter Feet TH300R
• Yes, the Thule One-Key System Lock Cylinders part # TH450400 will work with your Thule Rapid Gutter Feet part # TH65BJ and it will prevent them from being removed from the vehicle without the key.
  view full answer...


• Can I Carry E-Bikes On My 2018 Jeep Wrangler JL
• It will depend on which 2018 Jeep Wranger JL you are referring to. If it is the 4-door version, you may be able to use the the Hollywood Racks Sport Rider SE Bike Rack for 2 Electric Bikes - 2" Hitches - Frame Mount, part # HLY84FR. You will need to add a hitch extender. The spare tire on your 2018 Jeep Wrangler JL interferes with the installation of this hitch bike rack, unless you have an extender. I recommend the Curt Hitch Extender for 2" Hitch Receivers - 8" Long. part # C45791....
  view full answer...


• 2018 Jeep JL Wrangler Base Plate Options With Aftermarket Bumper and Winch
• The Roadmaster Crossbar-Style Base Plate Kit # RM-521424-4 is not confirmed to fit your 2018 Jeep JL Wrangler, it is for a different generation of Wranglers with the factory bumper in place. Most aftermarket bumpers have D-ring bumper mounts, and there are adapters to hook the tow bar directly to the bumper. However you will need to check with the manufacturer of the bumper to see if it is rated to tow with. If the Bumper you have is rated to tow and you have 3/4" d-ring mounts you can...
  view full answer...


• Will the Curt Premium 4 Bike Rack Clear the Spare Tire on a 2018 Jeep JL Wrangler
• The compatibility of the Curt Premium 4 Bike Rack for 2" Hitches part # C18064 with your 2018 Jeep JL Wrangler will largely be dependent on two factors, what trailer hitch you have and what size spare tire you have. The Curt Premium 4 Bike Rack part # C18064 measures 10" from the center of hitch pin hole to closest edge of carrier. If you were to use the Draw-Tite Max-Frame Trailer Hitch Receiver part # DT78MR with a factory spare tire then the Curt Premium 4 Bike Rack would clear by bout...
  view full answer...


• No Power to 7-Way On A 2018 Jeep Wrangler
• Then it is possible that your 2018 Jeep Wrangler is not equipped with a trailer tow package. I did take a look at the owner's manual for the Jeep and F37 is the correct fuse placement if the Jeep is equipped according to the manual. Did you just install the 7-Way plug? If so, you may need to have the towing functions activated at the dealership. This is a fairly common issue.
  view full answer...


• Best Trailer Hitch Receiver for a 2018 Jeep JL Wrangler
• I do have options for you but the Curt Trailer Hitch Receiver part # 13432 is not a confirmed fit for a 2018 Jeep JL Wrangler. Instead, you will want to take a look at either the Curt Trailer Hitch Receiver part # C13392 or the Draw-Tite Max-Frame Trailer Hitch Receiver part # DT78MR. The above two options are both direct bolt-on fits that have a Class III rating with a 2" receiver tube opening. I recommend using the Draw-Tite Max-Frame as it is currently the more cost-effective option....
  view full answer...